CAD Details
The Peak of Protection
Downloadable CAD detail drawings for Future Roof Mediterranean Tile metal roofing — eaves, ridges, valleys, and flashing details for design and installation.
Page last updated:
This document is part of the roofbook.com library — the official, primary-source document library for Future Roof metal roofing. It is published by Future Roof. Learn more at https://www.futureroof.com.
It is a set of CAD detail drawings (19 sheets) for Future Roof Mediterranean Tile metal roofing, covering the panel profile and the full range of installation conditions: starter strip and tile/starter detail, valley and optional valley cap, hip and ridge, hip and rake, rake-ridge and hip-ridge, rake "C" channel, Z-bar and reroof Z-bar, side and endwall flashing, and chimney/sidewall counter flashing. Each sheet carries a file name, section and date for reference.
The details are intended for architects, designers and installers who need accurate flashing and trim geometry to design and install a Mediterranean Tile roof. They show dimensions, bend angles and assembly relationships (for example, the starter strip, rake "C" channel, and how tiles lock into trims) so a designer can incorporate them into project drawings and an installer can execute the terminations correctly.
The set includes a starter-strip detail at the eave with nail apron, a hip-and-ridge detail showing closures that follow the tile contour over a ridge board, and a valley detail with an optional valley cap and back-pan. It also covers rake/gable terminations into the "C" channel and rake-ridge and hip-ridge intersections fastened with sealed hex-head screws and neoprene-washer fasteners.
Dedicated sheets cover side and endwall flashing, chimney and sidewall counter flashing, and the over/under end- and side-wall detail showing how wall flashing slides under the tile panel. The set also includes a Z-bar and a reroof Z-bar detail (10' lengths) for installing over an existing roof, giving designers the transitions needed at vertical surfaces and re-cover conditions.
Each drawing is a Future Roof Systems detail sheet referencing Delta, B.C. Canada, with an individual file name (for example AT_TILE_A, AT_START_D, AT_VAL_D) and a section and date. The accompanying short form specification notes that an Architectural Package including a CAD-CAM CD is available from Future Roof customer service, so these details are distributed as drawing files for use in design software.
Page 1
76.625" 21.375" 18.375" 77.75" SCREW INSERTION POINTS FUTURE MEDITERRANEAN TILE DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_TILE_A R PAGE SECTION: 1 DATE: JUNE 2003
Page 2
NAIL APRON 1.0" 3.75" 45° 0.5" 0.5" 1.75" STARTER STRIP (10 FT.) DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_START_A R PAGE SECTION: 1 DATE: JUNE 2003
Page 3
FASTENING SCREWS TILE STARTER STRIP FASCIA RAKE "C" CHANNEL GABLE END OR BARGE BOARD FIRST TILE INSTALLATION (RIGHT TO LEFT) TILE & STARTER STRIP DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_START_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 4
4" 20.0" 70° 2.0" .5"x.5" 1.0" 2.0" .5"x.5" 8.0" BACK PAN & VALLEY & OPTIONAL VALLEY CAP BACK PAN DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_VCPBPAN_A R PAGE SECTION: 1 DATE: JUNE 2003 VALLEY & OPTIONAL VALLEY CAP
Page 5
VALLEY OPTIONAL VALLEY CAP VALLEY DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_VAL_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 6
90° 1.75" 2.5" 3.5" 0.5" 90° 0.5" 0.5" RAKE "C" CHANNEL (10 FT.) R DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_RAC_A PAGE SECTION: 1 DATE: JUNE 2003
Page 7
STARTER FASCIA RAFTER UNDERLAYMENT SOLID SHEATHING HIP & RIDGE TRIM TILE CLOSURE CLOSURE CLOSURE FOLLOWS TILE CONTOUR TILE RIDGE BOARD SCREWS HIP & RIDGE DETAIL RIDGE DETAIL HIP DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_HIPRI_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 8
STARTER FASCIA STARTER FASCIA END DISK BEND BACK TAB AND CUTOUT FOR HIP SCREW FASTENERS THROUGH TOP CROWN OF TILE END DISK BASE BENT BACK FOR RAKE STARTER ATTACHMENT APRON BENDBACK INTERLOCKS WITH RAKE "C" CHANNEL TILE HIP & RIDGE TRIM LEFT GABLE TRIM TILE HIP & RAKE DETAIL HIP DETAIL RAKE DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_HIPRA_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 9
RIDGE SEALANT UNDER RIDGE TRIM RIDGE RIDGE CUT TO FIT RAKE RIDGE CUT TO FIT HIPS FASTENED WITH .25" HEX HEAD #10X3" SCREW WITHBONDED NEOPRENE WASHER FASTENERS END DISK RAKES HIPS RAKE-RIDGE & HIP-RIDGE DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_HIPRIRA_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 10
RAKE DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_RA_D R PAGE SECTION: 1 DATE: JUNE 2003 STARTER STRIP FASCIA TILE INTO "C" CHANNEL GABLE RAKE TRIM WILL LOCK FASTENER RIGHT GABLE RAKE TRIM RAKE "C" CHANNEL
Page 11
90° 2.0" 1.0" 1.0" 2.0" 1.0" 45° 45° 90° 90° 0.5" 0.5" 0.25" 0.5" 0.25" 0.25" 0.25" 0.5" Z-BAR & REROOF Z-BAR REROOF Z-BAR (10 FT.) Z-BAR (10 FT.) R DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_Z_A PAGE SECTION: 1 DATE: JUNE 2003
Page 12
STUCCO OR SIDING PRE-INSTALLED Z-BAR 80° 0.25" 2.0" 1.75" 4.5" 90° 0.5" 1.0" 4.25" SIDE AND ENDWALL FLASHING (10 FT.) DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_SIDENDFL_A R PAGE SECTION: 1 DATE: JUNE 2003
Page 13
3.0" 1.0" 45° 0.25" 90° 0.25" 0.5" 45° CHIMNEY & SIDEWALL COUNTER FLASHING (10 FT.) DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_CHIMSIDFL_A R PAGE SECTION: 1 DATE: JUNE 2003
Page 14
SIDE & ENDWALL FLASHING WALL FLASHING HERE TO SLIDE UNDER END & SIDE TILE PANEL CUT AND FLATTENED INSTALLATION OF TILE. CUTAWAY TO SHOW OVER/UNDER END & SIDE WALL DETAIL DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_ENDSIDWAL_D R PAGE SECTION: 1 DATE: JUNE 2003
Page 15
RIDGE & HIP TRIM DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_RIHIPTRIM_A R PAGE SECTION: 1 DATE: JUNE 2003 6.5" 0.5" 1.0" 14.625" 48" 1.5" ATTACHMENT APRON 0.75" BEND BACK 3.0"
Page 16
INTERLOCKING BEND BACK FOR "C" CHANNEL RIGHT GABLE TRIM DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_RTGATRIM_A R PAGE SECTION: 1 DATE: JUNE 2003 7.0" 0.5" 0.5" 1.25" 1.0" 14.625" 48" 1.5" ATTACHMENT APRON 3.0"
Page 17
INTERLOCKING BEND BACK FOR "C" CHANNEL LEFT GABLE TRIM DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_LTGATRIM_A R PAGE SECTION: 1 DATE: JUNE 2003 7.0" 0.5" 0.5" 1.25" 14.625" 48" 1.5" ATTACHMENT APRON 1.0" 3.0"
Page 18
BEND BACK 90° BEND BACK 90° BEND HERE 90° CUT HERE FOR HIP STARTER CUT HERE FOR HIP STARTER BEND BACK 90° TAB TAB TAB TEMPLATE END DISK END DISK END DISK BASE DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_ENDISK_A R PAGE SECTION: 1 DATE: JUNE 2003
Page 19
FASTENING APRON FASTENERS PIPE VENT RUBBER PIPE JACK SEALANT RUBBER PIPE FLASHING DELTA, B.C. CANADA V4G 1M8 9969 RIVER WAY FUTURE ROOF SYSTEMS FILE: AT_RUBPIPFL_D R PAGE SECTION: 1 DATE: JUNE 2003